Filter
Top Products
10-47
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 10 Configuring Ethernet OAM
Router# show ethernet oam statistics interface gigabitethernet 0/8
GigabitEthernet0/8
Counters:
---------
Information OAMPDU Tx : 5549
Information OAMPDU Rx : 5914
Unique Event Notification OAMPDU Tx : 0
Unique Event Notification OAMPDU Rx : 0
Duplicate Event Notification OAMPDU TX : 0
Duplicate Event Notification OAMPDU RX : 0
Loopback Control OAMPDU Tx : 0
Loopback Control OAMPDU Rx : 0
Variable Request OAMPDU Tx : 0
Variable Request OAMPDU Rx : 0
Variable Response OAMPDU Tx : 0
Variable Response OAMPDU Rx : 0
Cisco OAMPDU Tx : 1
Cisco OAMPDU Rx : 0
Unsupported OAMPDU Tx : 0
Unsupported OAMPDU Rx : 0
Frames Lost due to OAM : 0
Local Faults:
-------------
0 Link Fault records
1 Dying Gasp records
Total dying gasps : 1
Time stamp : 23:27:13
0 Critical Event records
Remote Faults:
--------------
0 Link Fault records
0 Dying Gasp records
0 Critical Event records
Local event logs:
-----------------
0 Errored Symbol Period records
0 Errored Frame records
0 Errored Frame Period records
0 Errored Frame Second records
Remote event logs:
------------------
0 Errored Symbol Period records
0 Errored Frame records
0 Errored Frame Period records
0 Errored Frame Second records
Verifying Link Monitoring Configuration and Status
To verify link monitoring configuration and status on the local client, use the show ethernet oam status
command. The Status field in the following example shows that link monitoring status is supported and
enabled (on).
Router# show ethernet oam status interface gigabitethernet 0/8
GigabitEthernet0/8
General
-------
Admin state: enabled
Mode: active