Filter
Top Products
11-10
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 11 ITU-T Y.1731 Performance Monitoring
How to Configure ITU-T Y.1731 Performance Monitoring
5. ethernet y1731 loss SLM domain domain-name {evc evc-id | vlan vlan-id} {mpid target-mp-id |
mac-address target-address} cos cos {source {mpid source-mp-id | mac-address
source-address}}
6. aggregate interval seconds
7. availability algorithm {sliding-window | static-window}
8. frame consecutive value
9. frame interval milliseconds
10. frame size bytes
11. history interval intervals-stored
12. owner owner-id
13. exit
14. exit
15. ip sla reaction-configuration operation-number [react {unavailableDS | unavailableSD |
loss-ratioDS | loss-ratioSD}] [threshold-type {average [number-of-measurements] | consecutive
[occurrences] | immediate}] [threshold-value upper-threshold lower-threshold]
16. ip sla logging traps
17. exit
DETAILED STEPS
Command Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
[no] asr901-platf-multi-nni-cfm
Example:
Router# asr901-platf-multi-nni-cfm
Enables Multi-NNI CFM configuration on the Cisco
ASR 901 router. The no form of this command
enables the SLM over cross connect EVC
configuration. The default option enables multi-NNI
CFM configuration.
Step 4
ip sla
operation-number
Example:
Router(config)# ip sla 11
Configures an IP SLA operation and enters IP SLA
configuration mode.
• operation-number—Identifies the IP SLAs
operation you want to configure.