8-25
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 8 Configuring Ethernet Virtual Connections
Configuring Other Features on EFPs
How to Configure DHCP Client on SVI
This section contains the following topics:
• Configuring DHCP Client on SVI
• Verifying DHCP Client on SVI
• Configuration Example for DHCP Client on SVI
Configuring DHCP Client on SVI
To configure the DHCP client, the IP address, mask, broadcast address, and default gateway address of
the SVI are retrieved from the server.
Complete the following steps to configure the DHCP client on SVI.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface vlan vlan-id
4. ip address dhcp
5. interface type-number
6. service instance instance-id ethernet encapsulation dotlq vlan-id
7. rewrite ingress tag pop [1|2] symmetric
8. bridge-domain bridge-id
9. end
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
interface vlan
vlan-id
Example:
Router(config)# interface vlan 15
Configures the VLAN interface and enters interface
configuration mode.