Filter
Top Products
10-11
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 10 Configuring Ethernet OAM
Router(config-if-srv)# bridge domain 40
Router(config-if-srv)# exit
Router(config-if)# exit
Verification
Use the following commands to verify a configuration:
• Use the show ethernet cfm maintenance-point local command to verify the Multi-UNI CFMs over
EVC configuration. This command shows the basic configuration information for Multi-UNI CFM.
Router# show ethernet cfm maintenance-points local
Local MEPs:
--------------------------------------------------------------------------------
MPID Domain Name Lvl MacAddress Type CC
Ofld Domain Id Dir Port Id
MA Name SrvcInst Source
EVC name
--------------------------------------------------------------------------------
30 MD6 6 4055.3989.7868 BD-V Y
No MD6 Up Gi0/4 30
MA6 30 Static
evc30
40 MD6 6 4055.3989.7869 BD-V Y
No MD6 Up Gi0/5 40
MA6_alias (MA6) 40 Static
evc40
Total Local MEPs: 2
Local MIPs: None
• Use the show ethernet cfm maintenance-point remote to verify the MEP configuration:
Router# show ethernet cfm maintenance-points remote
--------------------------------------------------------------------------------
MPID Domain Name MacAddress IfSt PtSt
Lvl Domain ID Ingress
RDI MA Name Type Id SrvcInst
EVC Name Age
Local MEP Info
--------------------------------------------------------------------------------
40 MD6 4055.3989.7869 Up Up
6 MD6 Gi0/6
- MA6 BD-V 30 30
evc30 0s
MPID: 30 Domain: MD6 MA: MA6
30 MD6 4055.3989.7868 Up Up
6 MD6 Gi0/7
- MA6_alias (MA6) BD-V 40 40
evc40 1s
MPID: 40 Domain: MD6 MA: MA6_alias (MA6)
Total Remote MEPs: 2