17-4
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 17 Configuring MPLS OAM
Configuring MPLS OAM
Using LSP Traceroute over Pseudowire
Use the traceroute mpls pseudowire command to verify the pseudowire path and the next hop details
at the remote peer.
Displaying AToM VCCV capabilities
Use the show mpls l2transport command to display the AToM VCCV capabilities.
Command Purpose
traceroute mpls pseudowire ipv4-address
vc_id vc-id-value segment
To verify AToM pseudowire path from the ASR 901
router to remote peer and next hop details at remote peer.
• ipv4-address is the ip address of the remote peer.
• vc_id is the virtual circuit id.
Command Purpose
show mpls l2transport binding vc_id
vc-id-value
To display AToM VCCV capabilities negotiated between
the peers.
• vc_id is the virtual circuit id.