Filter
Top Products
Contents
xi
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Scheduling IP SLAs Operations 11-14
Prerequisites 11-14
Verifying the Frame Delay and Synthetic Loss Measurement Configurations 11-15
Example: Verifying Sender MEP for a Two-Way Delay Measurement Operation 11-16
Example: Verifying Receiver MEP for a Two-Way Delay Measurement Operation 11-16
Example: Verifying Sender MEP for a Synthetic Loss Measurement Operation 11-17
Example: Verifying Ethernet CFM Performance Monitoring 11-17
Example: Verifying History for IP SLAs Operations 11-18
How to Configure IP SLAs Y.1731 On-Demand and Concurrent Operations 11-19
Configuring Direct On-Demand Operation on a Sender MEP 11-19
Prerequisites 11-19
Configuring Referenced On-Demand Operation on a Sender MEP 11-20
Prerequisites 11-20
Configuring IP SLAs Y.1731 Concurrent Operation on a Sender MEP 11-21
Configuration Examples for IP SLAs Y.1731 On-Demand Operations 11-21
Example: On-Demand Operation in Direct Mode 11-21
Example: On-Demand Operation in Referenced Mode 11-22
Additional References 11-23
Related Documents 11-23
Standards 11-23
MIBs 11-23
RFCs 11-23
Technical Assistance 11-24
Feature Information for ITU-T Y.1731 Performance Monitoring 11-25
CHAPTER
12 Configuring Resilient Ethernet Protocol 12-1
Contents 12-1
Understanding Resilient Ethernet Protocol (REP) 12-1
Overview 12-1
Restrictions 12-3
Link Integrity 12-4
Fast Convergence 12-4
VLAN Load Balancing (VLB) 12-4
REP Ports 12-6
Configuring Resilient Ethernet Protocol (REP) 12-7
Default REP Configuration 12-7
REP Configuration Guidelines 12-7
Configuring the REP Administrative VLAN 12-9
SUMMARY STEPS 12-9