Filter
Top Products
Contents
ix
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Verifying the LACP Transmit Rate 9-8
Configuring EtherChannel Load Balancing 9-8
Modifying MTU Size on Port-Channel 9-9
Restrictions 9-9
Verifying the MTU Size on Port-Channel 9-9
EVC On Port-Channel 9-10
Restrictions for EVC EtherChannel 9-10
Configuring EVC on Port-Channel 9-11
Verifying the Configuration 9-11
Troubleshooting 9-12
CHAPTER
10 Configuring Ethernet OAM 10-1
Contents 10-1
Understanding Ethernet CFM 10-2
IP SLA Support for CFM 10-2
Configuring Ethernet CFM 10-2
Default Ethernet CFM Configuration 10-3
Ethernet CFM Configuration Restrictions and Guidelines 10-3
Configuring the CFM Domain 10-3
Configuring Multi-UNI CFM MEPs in the Same VPN 10-7
Configuring Ethernet CFM Crosscheck 10-12
Configuring Static Remote MEP 10-13
Configuring a Port MEP 10-14
Configuring SNMP Traps 10-15
Configuring IP SLA CFM Operation 10-16
Manually Configuring an IP SLA CFM Probe or Jitter Operation 10-16
Configuring CFM over EFP with Cross Connect 10-19
Configuring CFM over EFP Interface with Cross Connect 10-20
Configuring CFM over EFP Interface with Cross Connect—Port Channel-Based Cross Connect
Tunnel
10-22
Configuring CFM with EVC Default Encapsulation 10-24
Verifying CFM with EVC Default Encapsulation 10-25
Example: Configuring CFM with EVC Default Encapsulation 10-26
Configuring Y.1731 Fault Management 10-26
Default Y.1731 Configuration 10-26
Configuring ETH-AIS 10-27
Configuring ETH-LCK 10-28
Managing and Displaying Ethernet CFM Information 10-30
Understanding the Ethernet OAM Protocol 10-32
OAM Features 10-33