Filter
Top Products
42-15
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 42 IPv6 Multicast
Configuring IPv6 Multicast
DR : not elected
GigabitEthernet0/1 off 0 30 1
Address: ::
DR : not elected
GigabitEthernet0/2 off 0 30 1
Address: ::
DR : not elected
GigabitEthernet0/3 off 0 30 1
Address: ::
DR : not elected
GigabitEthernet0/4 off 0 30 1
Address: ::
DR : not elected
GigabitEthernet0/5 off 0 30 1
Address: ::
DR : not elected
GigabitEthernet0/6 off 0 30 1
Address: ::
DR : not elected
GigabitEthernet0/7 off 0 30 1
Address: ::
DR : not elected
Vlan1 off 0 30 1
Address: ::
DR : not elected
Loopback0 on 0 30 1
Address: FE80::4255:39FF:FE89:69CC
DR : this system
Port-channel2 off 0 30 1
Vlan10 on 1 30 1
Address: FE80::4255:39FF:FE89:69C8
DR : FE80::4255:39FF:FE89:7404
Vlan20 off 0 30 1
Address: ::
DR : not elected
Vlan30 off 0 30 1
Address: ::
DR : not elected
Vlan100 on 0 30 1
Address: FE80::4255:39FF:FE89:69C8
DR : this system
Tunnel0 off 0 30 1
Address: FE80::4255:39FF:FE89:69CC
DR : not elected
Tunnel1 off 0 30 1
Address: FE80::4255:39FF:FE89:69CC
DR : not elected
To display the number of (*, G) and (S, G) membership reports present in the MLD cache, use the show
command described in the following example.
Router# show ipv6 mld groups summary
MLD Route Summary
No. of (*,G) routes = 6
No. of (S,G) routes = 0
To display the number of PIM neighbors on each interface, as well as, the total number of PIM neighbors,
use the show command described in the following example.
Router# show ipv6 pim neighbor count