Filter
Top Products
Call (callback)
List callback information for each user, including the type of
callback and number.
Time List time allowed configured for each user.
Dial (dialback)
List dial out status for each user.
Encr (encryption)
List whether encryption is enabled for each user.
tunnel-profile
Displays the tunnel-profile parameters.
Example:
Config>list tunnel-profile
Endpoint Tunnel name Hostname
11.0.0.192 lac lns
1 TUNNEL record displayed.
Config>
Tunnel Name
Specifies the configured name for the peer.
Server Endpoint
The IP address of the peer.
Type Specifies the type of peer connection.
Medium
Specifies the protocol that the tunnel is using.
Local Host Name
Specifies the name configured for use when connecting to the peer.
users Displays the users configured to access the system.
Example:
list users
USER PERMISSION
joe operations
mary administrative
peter monitor
v25-bis-address
Displays the current V25bis address configurations. The V25bis address
configuration consists of the network address and network address name
for a local port (serial line interface) or destination port. The network
address is the telephone number of the local or destination port. The
network address name can be anything, such as the description of the port.
See “Chapter 41. Using the V.25bis Network Interface” on page 579 for
more information.
Example:
list v25-bis-address
Address assigned name Network Address
--------------------- ---------------
v25-1 8982800
v25-2 8980001
delaware 1-666-555-4444
v34-address
Displays the current V34 address configurations. For more information, see
“Chapter 43. Using the V.34 Network Interface” on page 595.
CONFIG Commands
Chapter 6. Configuring and Monitoring the CONFIG Process 71
|
|
|
|
|
|
|