Filter
Top Products
Notrace
Disables packet trace for the specified event/range/subsystem/group.
Syntax:
notrace
event...
group...
range...
subsystem...
event
subsystem.event#
Suppresses the sending of packet trace data for the specified event#
group
groupname
Suppresses the sending of packet trace data that was previously added to
the specified group (groupname).
range
subsystemname first_event_number last_event_number
Where
first_event_number
is the number of the first event in the specified
event range, and
last_event_number
is the number of the last event of the
specified event range.
Disables the sending of packet trace data for a range of messages for the
specified subsystem.
Example:
trace range gw 19 22
Suppresses the sending of packet trace data for events gw.19, gw.20,
gw.21, and gw.22.
subsystem
subsystemname
Suppresses the sending of packet trace data for the specified subsystem
(subsystemname).
Notrap
Use the notrap command to select and turn off messages so that they are no
longer sent to a network management workstation in SNMP traps.
Syntax:
notrap
event...
group...
range...
subsystem...
event
subsystem.event#
Suppresses the sending of the specified message in an SNMP trap
(
subsystem.event#
).
group
groupname
Suppresses the sending of messages in SNMP traps that were previously
added to the specified group (
groupname
).
range
subsystemname first_event_number last_event_number
ELS Configuration Commands (Talk 6)
174
MRS V3.2 Software User’s Guide