Filter
Top Products
memory
Example:
memory
Number of bytes: Busy = 319544, Idle = 1936, Free = 1592
Busy Specifies the number of bytes currently allocated.
Idle Specifies the number of bytes previously allocated but freed and available
for reuse.
Free Specifies the number of bytes that were never allocated from the initial free
storage area.
Note: The sum of the Idle and Free memory equals the total available heap
memory.
Pause (EasyStart only)
Use the pause command to suspend the EasyStart function. Use this command
only when debugging the router. After completing your debugging session, enter the
restart command to restart the router and resume the EasyStart function. The
router will reenter EasyStart.
Syntax:
pause
Example:
pause
Entering EasyStart operation. Type 'stop' to terminate.
ELS messages are automatically displayed in this mode.
EasyStart>
EZ.001: Starting.
EZ.007: Waiting up to 6 seconds for devices to pass self-test.
pause
* restart
Are you sure you want to restart the gateway? (Yes or [No]): yes
Copyright Notices:
Copyright IBM Corp. 1994, 1997
MOS Operator Control
Entering EasyStart operation. Type 'stop' to terminate.
ELS messages are automatically displayed in this mode.
┌───────────────┐ ┌────────────────┐ ┌────────────────┐
│ │ │ │ │Free=1128 │
│Free=1393515 │ │Free=103068 │ │----------------│
││││││
│ │ │----------------│ │Idle=103068 │
│---------------│─Water │Idle=1128 │ │ │
│Idle=1128 │ Mark ├────────────────┤ ├────────────────┤
├───────────────┤ │ │ │ │
││││││
│Busy=103068 │ │Busy=1393515 │ │Busy=1393515 │
││││││
└───────────────┘ └────────────────┘ └────────────────┘
Under-Utilized Properly Utilized Over-Utilized
Figure 3. Memory Utilization
Chapter 4. Using OPCON 31