Filter
Top Products
Circuit config: 7>set net 6
Circuit config: 7>set timeslot23424
Circuit config: 7>list
Base net = 6
Idle character = 7E
Bandwidth = 64 Kbps
Timeslot =23424
Note: If this were an E1 circuit, the available timeslots would be 1 to 31.
Requirements and Restrictions for ISDN Interfaces
Router
The ISDN software requires the following models of the IBM 2210:
v 127
v 128
v 14T
v 24E - requires an ISDN adapter
v 24T - requires an ISDN adapter
v 24M - requires an ISDN adapter
v 1S4
v 1S8
v 1U4
v 1U8
Switches/Services Supported
The ISDN Basic Rate Interface (BRI) supports the following switches/services:
v AT&T 5ESS (North America)
v DMS100 (North America)
v USNI1 (North America National ISDN1)
v USNI2 (North America National ISDN2)
v NET 3 (European ETSI)
v INS-Net 64 (Japan)
v VN3 (France Telecom)
v AUS TS 013 (Australia)
v I.430 (See “ISDN I.430 and I.431 Switch Variants” on page 625.)
The ISDN Primary Rate Interface (PRI) supports the following switches/services:
Switch names Valid command
AT&T 5ESS (North America) 5ESS
AT&T 4ESS (North America 4ESS
Australia (AUSTEL) AUSPRI
INS-Net 1500 (Japan, NTT) INSPRI
National ISDN 2 (North America) USNI2
NET 5 (Euro-ISDN, ETSI) NET5
Northern Telecom DMS (DMSPRI) DMSPRI
Native I.431 I431 (See “ISDN I.430 and I.431 Switch
Variants” on page 625.)
Using ISDN
618
MRS V3.2 Software User’s Guide
|
|
|
|
||
||
||
|