Filter
Top Products
Example:
parameters packet
Packet Layer Parameters:
Default Packet Size = 128 Maximum Packet Size = 256
Log 2 Packet size = 2 Acknowledge Delay = 0
Layer Enabled = YES Default Window Size = 2
Lowest SVC = 1 Highest SVC = 64
Lowest PVC = 0 Highest PVC = 0
T20 (Restart) = 18 R20 (Retry) = 1
T21 (Call) = 20
T22 (Reset) = 18 R22 (Retry) = 1
T23 (Clear) = 18 R23 (Retry) = 1
Network Type = GTE Equipment Type = DTE
Recall Timer = 10 seconds
Min Connect = 90 seconds
Collision = 5 seconds
physical
Displays the parameters for the physical level.
Example:
parameters physical
Physical Layer Parameters:
Interface Type = V.35
Maximum Frame Size = 264 InterFrame Delay = 2
Configured Speed = 0 Clocking = External
Encoding = NRZ
Protocol Enabled = Yes
Statistics
Use the statistics command to display the current statistics of any level of the X.25
configuration.
Syntax:
statistics
all
frame
packet
physical
all Displays the statistics for the packet, frame, and physical levels.
frame Displays the statistics for the frame level.
Example:
statistics frame
Frame Layer Counters: Received Transmitted
Information Frames 0 0
RR Command 0 0
RR Response 0 0
RNR Command 0 0
RNR Response 0 0
REJ Command 0 0
REJ Response 0 0
SABM 0 71
SABME 0 0
UA 0 0
DISC 0 0
DM 0 0
FRMR 0 0
Total Bytes 0 0
T1 Timeouts 0 T2 Timeouts 0 N2 Timeouts 1
Bad Address 0 Unsolicited F-Bit 0 Invalid Ctl 0
Frame Layer Miscellaneous:
Queued Output Frames = 0 Protocol Layer State = Link Setup
Send Sequence N(S) = 0 Receive Sequence N(R)= 0
packet
Displays the statistics for the packet level.
Configuring the X.25 Network Interface
Chapter 27. Configuring and Monitoring the X.25 Network Interface 355