Filter
Top Products
Example:
list v34-address
Local Network Address Name = v403
Local Network Address = 1-508-898-2403
Network
Use the network command to enter the network interface configuration environment
for supported networks. Enter the interface or network number as part of the
command. (To obtain the interface number, use the CONFIG list device command.)
The appropriate configuration prompt (for example, TKR Config>) will be displayed.
See the network interface configuration chapters in this book for complete
information on configuring your types of network interfaces.
Syntax:
network
interface#
Notes:
1. If you change a user-configurable parameter, you must restart
2. Not all network interfaces are user-configurable. For interfaces that you cannot
configure, you receive the message: That network is not configurable.
Patch
Use the patch command for modifying the router’s global configuration. Patch
variables are recorded in nonvolatile configuration memory and take effect
immediately; you do not have to wait for the next restart of the router. This
command should be used only for handling uncommon configurations. Anything that
you commonly configure should still be handled by using the specific configuration
commands. The following is a list of the current patch variables documented and
supported for this release.
Syntax:
patch
bgp-subnets
dls-ignore-lfs
ethernet-security
filter-nr
ip-default-ttl
ip-mtu
lnm-link-via-tbport
more-lines
mosheap-lowmark
ospf-import-rate
ping-size
ping-ttl
ppp-echo
relax-jate
rip-static-suppress
CONFIG Commands
72
MRS V3.2 Software User’s Guide