Filter
Top Products
subsystem all
Lists all events, logging levels, and messages for every event that has
occurred on the router.
trace-status
Displays information on the status of packettracing, including configuration
and run-time information.
Example:
list trace-status
------------------------- Configuration -----------------------------
Trace Status:ON Wrap Mode:ON Decode Packets:OFF HD Shadowing:OFF
RAM Trace Buffer Size:100000 Maximum Trace Buffer File Size:10000000
Default Packet Bytes Traced:100 Max Packet Bytes Traced:256
------------------------ Run-time Status ----------------------------
Packets in RAM Trace Buffer:535 Free Trace Buffer Memory:180
Trace Errors:22 First Packet:23 Last Packet:557
Trace Buffers Shadowed to HD:0 Trace Buffer File Size:0
v “Trace Status” in the LIST TRACE-STATUS display will indicate OFF
when STOP-ON-EVENT action occurs.
v “HD Shadowing” in the LIST TRACE-STATUS display will indicate OFF
when STOP-ON-EVENT action occurs or when Time Limit is exceeded.
v “Trace Buffer File Size” will display “<wrapped>” when a wraparound has
occurred in the trace file.
v If disk-shadowing time limit is exceeded, but there has not been a trace
record written since the time expired, then“ HD-Shadowing Time
Exceeded? NO <Next trace will turn it OFF>” will be displayed. When the
next trace record has been written, then “HD-Shadowing Time
Exceeded? YES” will be displayed.
ELS Config>LIST TRACE command under talk 6 displays information
similar to the following:
------------------------- Configuration -----------------------------
Trace Status:ON Wrap Mode:ON Decode Packets:ON HD Shadowing:ON
RAM Trace Buffer Size:100000 Maximum Trace Buffer File Size:10000000
Max Packet Bytes Trace:256 Default Packet Bytes Traced:100
Trace File Record Size:2048 Stop Trace Event: TCP.013
Maximum Hours to HD Shadow: 1
Nodisplay
Use the nodisplay command to select and turn off messages displaying on the
console.
Syntax:
nodisplay
event...
group...
range...
subsystem...
event
subsystem.event#
Suppresses the displaying of messages for the specified event.
group
group.name
Suppresses the displaying of messages that were previously added to the
specified group (
group.name
).
range
subsystemname first_event_number last_event_number
ELS Monitoring Commands (Talk 5)
192
MRS V3.2 Software User’s Guide
|