Filter
Top Products
List
Use the list command to display the configuration of a specific group or of all
groups.
Syntax:
list
all
group
group#
all Displays the statistics of all local groups. See the list group command for a
sample output.
group
group#
Displays the statistics of a specified group.
Example:
list group 1
BSC Relay Configuration
Local Group Port Net Remote Station IP
Group Type Status Number Group Address Address
------ ----- ----------------- ------ ------ ------- ---------------
1 (E) MULTI Local PRMRY (E) 1
Remote SCNDRY (E) 1 C1 6.6.6.1
Local port statistics:
Packets forwarded = 0
Packets discarded = 0
Remote port statistics:
Packets forwarded = 0
Packets discarded = 0
Local Group
Indicates the group number and the status of the group, enabled
(E) or disabled (D).
Group Type
Specifies the type of BSC connection this group supports:
point-to-point or multipoint.
Port Status
Indicates the type of port (local/remote primary/secondary) and its
status, enabled (E) or disabled (D).
Net Number
Indicates the device number of the local port.
Station Address
The character that the system displays for a secondary port.
IP Address
Indicates the IP address of the remote port.
Remote Group
The number of the group at the remote router.
Packets Forwarded
Indicates how many packets the system forwarded for the port.
Packets Discarded
Indicates how many packets the system discarded for the port.
The following example displays the configuration built for Router A in the figure for
“Sample BRLY Configuration” on page 562.
Configuring and Monitoring BSC Relay
Chapter 40. Configuring and Monitoring BSC Relay 577
|
|
|
|
||
||
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|