Filter
Top Products
MIB
Use the mib command to display MIB objects.
Note: Some of this information may be displayed in a different format using the list
command.
Syntax:
mib
config-table
mac-arp-table
rd-arp-table
server-vcc-table
statistics-table
status-table
config Displays the LEC MIB Configuration Table.
Example:
LEC+ mib config
lecConfigTable:
lecConfigMode = Manual
lecConfigLanType = 802.3 - Ethernet
lecConfigMaxDataFrameSize = 1516
lecConfigLanName =
lecConfigLesAtmAddress = 39.84.0F.00.00.00.00.00.11.23.24.24.24.24.55.66.77.88.99.00
lecControlTimeout = 120
lecMaxUnknownFrameCount = 1
lecMaxUnknownFrameTime = 0
lecVccTimeoutPeriod = 1200
lecMaxRetryCount = 1
lecAgingTime = 300
lecForwardDelayTime = 15
lecExpectedArpResponseTime = 1
lecFlushTimeout = 4
lecPathSwitchingDelay = 6
lecLocalSegmentId = 0
lecMulticastSendType = 1
lecMulticastSendAvgRate = 25000000
lecMulticastSendPeakRate = 25000000
lecConnectionCompleteTimer = 4
lecConfigMode
LEC config mode: AUTO or MANUAL. If AUTO, LEC Uses LECS to
get the LES ATM address.
lecConfigLanType
LAN type, either Ethernet or token-ring
lecConfigMaxDataFrameSize
Maximum frame size
lecConfigLanName
ELAN Name
lecConfigLesAtmAddress
LE Server ATM address
lecControlTimeout
Timeout for request/response control frame
lecMaxUnknownFrameCount
Maximum number of unknown frames
Configuring Forum LE Clients
Chapter 24. Configuring and Monitoring LAN Emulation Clients 313