Filter
Top Products
Table 24. ELS Net Filter Monitoring Commands
Command Function
? (Help) Displays all the commands available for this command level or lists the
options for specific commands (if available). See “Getting Help” on page
10.
Create Creates a filter and assigns it a number. A maximum of 64 filters is
allowed.
Delete Deletes a specified filter number or all filters.
Disable Disables a specified filter number or all filters.
Enable Enables a specified filter number or all filters.
List Lists a specified filter number or all filters.
Exit Returns you to the previous command level. See “Exiting a Lower Level
Environment” on page 11.
Create
Use the create command to create an ELS net filter.
Syntax:
create
queue
event
event_name net#_start net#_end
range
event_range net#_start net#_end
subsystem
subsystem_name net#_start net#_end
queue The queue for which you are setting the filter. The valid queues are:
Display
Trace
Trap
Remote
event
event_name net#_start net#_end
Specifies the event and net numbers that you are filtering.
If you specify
net#_start
and
net#_end
as the same number, you are
filtering on a single net number.
The command create trap event GW.009 2 10 filters traps for message
GW.009 for net numbers 2 through 10.
range
event_range net#_start net#_end
Specifies the range of ELS messages and net numbers that you are
filtering.
If you specify
net#_start
and
net#_end
as the same number, you are
filtering on a single net number.
The command create remote range ipx 19 22 3 6 filters all ipx messages
beginning with IPX.019 and ending with IPX.022 for net numbers 3 through
6 for remote logging.
subsystem
subsystem_name net#_start net#_end
Specifies the subsystem and net numbers that you are filtering.
If you specify
net#_start
and
net#_end
as the same number, you are
filtering on a single net number.
The command create display subsys ip 1 1, filters all ELS messages for
the ip subsystem that contain net number 1 to the display. All other ip
subsystem messages are discarded.
ELS Monitoring Commands (Talk 5)
208
MRS V3.2 Software User’s Guide