IBM SC30-3681-08 Saw User Manual


 
If you try to execute one of these tests without the wrap plugs installed, you
receive the following message:
You have selected a test that requires external wrap
plugs to be present. Remove the cable(s) from the
network, and attach the appropriate wrap plug(s).
3. Press the space bar to select one of the diagnostic options available and follow
the instructions provided with the extended diagnostics Service Kit.
Diagnostic Main Menu (c) 1994
1) System Checkout (Internal Tests)
2) System Extended Checkout (Internal and External Tests)
3) WAN/LAN Wrap Menu
4) Diagnostic Utilities
x) Exit (and Reboot)
DM (Dump using Console Queries)
Displays prompts to manually configure the network dump information.
Enter dm at the boot prompt (>).
The screen displays the following information:
PROM Load/Dump Program * Revision 1.0
Copyright IBM Corp. 1994, 1997
Host ??? loading
Using Token Ring/Ethernet (00000, 0)
Trying host 0.0.0.0 via 0.0.0.0
file load image name
loading
Starting at 1040000
If the dump fails, you will receive a Dump failed message with a brief explanation
of the cause of the failure.
UB (Display TFTP Boot Configuration)
Displays the static RAM TFTP bootstrap configuration including:
v Host name
v Whether dumping is enabled or disabled
v Whether the unique naming capability is enabled or disabled
v Interface IP address, type of interface, and mask
v Boot file name
v Host IP address
v Gateway IP address
If you have created dump files, UB also displays the dump file name and IP
address of the host on which the dump files reside and the IP address of the
intermediate gateway, if applicable.
Chapter 9. Boot Options 121