Filter
Top Products
communicating with the router. The network
address-name
can be anything,
such as a description of the port. You can use any string of up to 23
printable ASCII characters. The
network-dial-address
is the telephone
number of the local or destination port. You can enter up to 31 characters
that are in the valid dial characters for the connected modem. For more
information, see “Chapter 43. Using the V.34 Network Interface” on
page 595 .
Note: You can use punctuation, such as parentheses and dashes, but the
punctuation is not significant (the router uses only the numbers).
Example: add v34-address
Assign address name [1-23] chars []? remote-site-baltimore
Assign network dial address [1-20 digits][]? 1-909-555-1234
Boot
Use the boot command to enter the Boot CONFIG command environment. For
Boot CONFIG information, see “Chapter 7. The Boot CONFIG Process” on page 83.
Syntax:
boot
Change
Use the change command to modify an interface in the configuration, change your
own password, or change user information.
Syntax:
change
device...
password
ppp_user...
tunnel-profile
device dial-circuit
Allows you to change a device interface into a
NULL
interface (an interface
for which the configuration information is ignored) or to change a NULL
interface, that was originally a dial circuit interface, back to a dial circuit
interface.
Example:
change device dial-circuit
Interface number [0]? 3
Defaulting Data-link protocol to PPP
Example:
change device null
Interface number [0]? 1
password
Modifies the password of the user who is now logged in.
Note: To change a user password, you must have administrative
permission.
CONFIG Commands
Chapter 6. Configuring and Monitoring the CONFIG Process 59