Filter
Top Products
Default Value: Default value is determined according to
CIR-defaults at the interface level
Requested incoming CIR
Specifies the requested incoming CIR.
Valid Values: The CIR can be either 0 or a value in the range 300
bps to 2 048 000 bps.
Default Value: Value of the requested outgoing CIR
Minimum acceptable incoming Committed Information Rate (CIR)
Specifies the minimum CIR that will be accepted if the network
cannot provide the requested CIR.
Valid Values: The CIR can be either 0 or a value in the range 300
bps to 2 048 000 bps with a maximum of the requested incoming
CIR.
Default Value: Same as minimum acceptable outgoing CIR
Requested outgoing committed burst size (Bc)
Specifies the requested outgoing committed burst size.
Valid Values: The CIR can be either 0 or a value in the range 300
bps to 2 048 000 bps.
Default Value: Value determined according to CIR-defaults at the
interface level
Requested incoming committed burst size (Bc)
Specifies the requested incoming committed burst size.
Valid Values: The CIR can be either 0 or a value in the range 300
bps to 2 048 000 bps.
Default Value: Value equal to requested outgoing Bc
Outgoing excess burst size (Be)
Specifies the requested outgoing burst size.
Valid Values: The CIR can be either 0 or a value in the range 300
bps to 2 048 000 bps.
Default Value: Value determined according to CIR-defaults at the
interface level
Requested incoming excess burst size (Be)
Specifies the requested incoming excess burst size.
Valid Values: The CIR can be either 0 or a value in the range 300
bps to 2 048 000 bps.
Default Value: Same as requested outgoing excess burst size
(Be)
Idle timer
Specifies the time period that a SVC will remain active in the
absence of traffic. Specifying 0 designates this SVC as a fixed
circuit that will be established the first time data arrives for it and
will not be disconnected even if no traffic flows over it.
Valid Values: 0 - 65535 seconds
Default Value:60
Configuring Frame Relay Interfaces
Chapter 31. Configuring and Monitoring Frame Relay Interfaces 411
|
||
|
|
|
|
|
|
|
|
|
|
||
||
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
|
|