Filter
Top Products
stop Stops the wrap procedure and displays final wrap statistics.
ATM-LLC Monitoring Commands
This section explains the commands for monitoring ATM LLC multiplexing.
Enter the commands at the ATM-LLC+ prompt.
Table 40. ATM LLC Configuration Command Summary
Command Function
? (Help) Displays all the commands available for this command level or lists the
options for specific commands (if available). See “Getting Help” on
page 10.
List Lists various options
Exit Returns you to the previous command level. See “Exiting a Lower
Level Environment” on page 11.
List
Use the list command to list various categories of ATM LLC monitoring data.
Syntax:
list
endpoints
channels
endpoints
Lists the ATM addresses in use by protocols using the ATM-LLC
multiplexing function on the device. The endpoint is displayed as the End
System Identifier and the Selector.
Example: list endpoints
ATM-LLC+ list endpoints
channels
Lists the channels in use by protocols using the ATM-LLC multiplexing
function on the device.
Example: list channels
ATM-LLC+ list channels
ATM Virtual Interface Monitoring Commands
Monitoring the ATM virtual interface is done using the ATM LLC monitoring
commands. See “ATM-LLC Monitoring Commands” for additional information.
ATM Interface Monitoring Commands (Talk 5)
290
MRS V3.2 Software User’s Guide