Filter
Top Products
Syntax: clear link
station ...
link
name
or
address
Clears the counters for an SDLC interface.
station
name
or
address
or all
Clears counters for a specific station or for all stations.
Delete
Use the delete command to terminate an existing SDLC connection without
affecting the SDLC configuration in SRAM. This command terminates any SDLC
session that may be in progress on the link station. The router is considered the
primary end station by default.
Syntax:
delete
station
name
or
address
Disable
Use the disable command to disable connection establishment on one or all SDLC
link stations without affecting the SDLC configuration in SRAM. The disable
command also terminates any existing connection to the station.
Syntax: disable
link
station...
link Prevents connection on all configured SDLC link stations on the interface
by terminating all connections.
station
name
or
address
Prevents connection to the specified end station (link station name) by
terminating any existing connection.
Enable
Use the enable command to enable connection establishment with remote SDLC
link stations without affecting the SDLC configuration SRAM.
Syntax:
enable
link
station...
link Allows subsystems (for example, DLSw) to use SDLC’s facilities.
station
name
or
address
Allows connections to the specified end station.
List
Use the list command to display statistics specific to the data link layer and the
interface.
Syntax:
Configuring SDLC Interfaces
Chapter 38. Configuring and Monitoring SDLC Interfaces 551