Filter
Top Products
Dial-dump
Use the dial-dump command to display the operation characteristics of the
specified dial circuit.
Syntax:
dial-dump
ciruitname
L2_Counters
Use the L2_counters command to list the L2/L1 states along with some L2
counters.
Syntax:
L2_counters
L3_Counters
Use the L3_Counters command to list counters of set ups
sent/received/accepted.Syntax:
L3_counters
TEI
Use the TEI command to list the status of TEIs. For BRI only.
Syntax:
parameters
Example:
parameters
ISDN Port parameters:
Local Address Name: vl233
Local Network Address: 20
Local Network Subaddress:
Frame Size: 2048
TEI 0: Automatic
TEI 1: Automatic
X.25 TEI: 21
Switch Variant: AT&T 5ESS (United States)
Multipoint Selection: Multipoint
Directory Number 0: 20
Outbound call address Timeout: 180 Retries: 0
Parameters
Use the parameters command to display the current ISDN configuration.
Syntax:
parameters
ISDN Monitoring Commands
638
MRS V3.2 Software User’s Guide
|
|
|
|
|||
|
|
|
|
|
||
|
|
|
|
||
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|