Filter
Top Products
pref cug
Specifies the preferred closed user group number for this DTE. The
DTE uses this CUG when placing outgoing calls.
Valid values: 0 to 9999
Default value: None
Note: You will not be prompted for this value if you have not
enabled the closed user group facility using the national
enable command.
CUG Specifies the closed user group numbers for this DTE. Up to five
CUGs may be defined, including the pref CUG.
Valid values: 0 to 9999
Default value: None
Note: You will not be prompted for this value if you have not
enabled the closed user group facility using the national
enable command.
pref bi-cug
Specifies the bilateral closed user group number for this DTE. The
DTE uses this CUG when placing outgoing calls.
Valid values: 0 to 9999
Default value: None
Note: You will not be prompted for this value if you have not
enabled the bilateral closed user group facility using the
national enable command.
bi-cug Specifies the bilateral closed user group numbers for this DTE. Up
to five CUGs may be defined.
Valid values: 0 to 9999
Default value: None
Note: You will not be prompted for this value if you have not
enabled the bilateral closed user group facility using the
national enable command.
cugs Specifies the closed user group number for this X.25 interface.
Valid values: 0 to 9999
Default value: None
Note: You will not be prompted for this value if you have not enabled the
closed user group facility using the national enable command.
Example:
add cugs
Pref CUG []? 23
CUG (2) []? 24
CUG (3) []? 25
CUG (4) []? 26
CUG (5) []? 27
Configuring the X.25 Network Interface
Chapter 27. Configuring and Monitoring the X.25 Network Interface 343