Filter
Top Products
List
Use the list command to display statistics specific to the data-link layer and the
Frame Relay interface.
Syntax:
list
all
circuit...
lmi
permanent-virtual-circuits
pvc-groups
switched-virtual-circuit
svcs
virtual-circuits
all Displays circuit, management, and VC statistics on the Frame Relay
interface. The output displayed for this command is a combination of the
list lmi and list permanent-virtual-circuit commands.
circuit
name or number
Displays detailed virtual circuit configuration and statistical information for
the specified VC using the input circuit name or DLCI.
Example:
list circuit 347
Circuit name = Valencia
Circuit state = Active Circuit is orphan = No
Frames transmitted = 0 Bytes transmitted = 0
Frames received = 0 Bytes received = 0
Total FECNs = 0 Total BECNs = 0
Times congested = 0 Times Inactive = 0
CIR in bits/second = 64000 Potential Info Rate = 56000
Committed Burst (BC) = 1200 Excess Burst (Be) = 54800
Minimum Info Rate = 16000 Maximum Info Rate = 64000
Required = Yes PVC group name = group1
Compression capable = Yes Operational = Yes
R-Rs received = 0 R-Rs transmitted = 0
R-As received = 0 R-As transmitted = 0
R-R mode discards = 0 Enlarged frames = 0
Decompress discards = 0 Compression errors = 0
Compression ratio = 1.72 to 1 Decompression ratio = 1.10 to 1
Encryption capable = Yes Operational = Yes
Encryption errors = 0 Decryption errors = 0
Rcv error discards = 0
Current number of xmit frames queued = 0
Xmit frames dropped due to queue overflow = 0
Circuit state
Indicates the state of the circuit: inactive, active, or congested.
Inactive indicates that the circuit is not available for traffic because
either the Frame Relay interface is down or the Frame Relay
management entity has not notified the Frame Relay protocol that
the circuit is active. Active indicates that data is being transferred.
Congested indicates that data flow is being controlled.
Circuit is orphan
Indicates if the circuit is a non-configured PVC learned through LMI
management or a callin-in for a non-configured SVC.
Monitoring Frame Relay Interfaces
434
MRS V3.2 Software User’s Guide
||
||
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||