Filter
Top Products
“TRAP”, “TRACE”, or “REMOTE-LOGGING”). Finally, you specify the net number
(or range of net numbers) that you want to filter.
When you enable the filter, messages that have been turned on by the ELS
commands are subject to filtering. The filter allows only messages with the specified
net numbers. The filter causes the device to discard messages that do not contain
the specified net numbers.
By reducing the number of ELS messages sent, you can more easily locate
messages for the interfaces in which you are interested.
This section describes the commands to configure the ELS net filters. To configure
these filters, enter the filter net command at the ELS> prompt. Then, enter the
configuration commands at the ELS Filter net> prompt.
Table 20. ELS Net Filter Configuration Commands
Command Function
? (Help) Displays all the commands available for this command level or lists the
options for specific commands (if available). See “Getting Help” on page
10.
Create Creates a filter and assigns it a number. A maximum of 64 filters is
allowed.
Delete Deletes a specified filter number or all filters.
Disable Disables a specified filter number or all filters.
Enable Enables a specified filter number or all filters.
List Lists a specified filter number or all filters.
Exit Returns you to the previous command level. See “Exiting a Lower Level
Environment” on page 11.
Create
Use the create command to create an ELS net filter.
Syntax:
create
queue
event
event_name net#_start net#_end
range
event_range net#_start net#_end
subsystem
subsystem_name net#_start net#_end
queue The queue for which you are setting the filter. The valid queues are:
Display
Trace
Trap
Remote
event
event_name net#_start net#_end
Specifies the event and net numbers that you are filtering.
If you specify
net#_start
and
net#_end
as the same number, you are
filtering on a single net number.
The command create trap event GW.009 2 10 filters traps for message
GW.009 for net numbers 2 through 10.
range
event_range net#_start net#_end
Specifies the range of ELS messages and net numbers that you are
filtering.
ELS Configuration Commands (Talk 6)
182
MRS V3.2 Software User’s Guide