Filter
Top Products
SNRM Number of Set Normal Response Mode frames received
and transmitted
DISC Number of Disconnect frames received and transmitted
UA Number of Unnumbered Acknowledgment frames received
and transmitted
DM Number of Disconnected Mode frames received and
transmitted
FRMR Number of Frame Reject frames received and transmitted
UP Unnumbered Polls (group poll) received and transmitted.
Example:
list link counters
I-Frames I-Bytes Re-Xmit UI-Frames UI-Bytes
-------- ------- ------- --------- --------
Send 0 0 0 0 0
Recv 0 0 0 0
RR RNR REJ UP
------- ------ ---- ---------
Send 0 0 0 0
Recv 0 0 0 0
Example:
list station all
Address Name Status Max BTU Rx Window Tx Window
-------- ----- ------ ------- --------- ---------
C1(00) SDLC_C1 IDLE 2048 7 7
C2(F3) SDLC_C2 ENABLED 2048 7 7
Example:
list station c1
Address Name Status Max BTU Rx Window Tx Window
------- ------ -------- ------- --------- ---------
* C1(00) SDLC_C1 ENABLED 2048 7 7
Example:
list station c1 counters
I-Frames I-Bytes Re-Xmit UI-Frames UI-Bytes XID-Frames
---------- ---------- --------- ---------- ---------- ----------
Send 9 384 0006
Recv 29 42792 0 0 3
RR RNR REJ TEST SNRM DISC
---------- ---------- --------- ---------- ---------- ----------
Send 598 0 0010
Recv 587 0 0000
UA DM FRMR UP
---------- ---------- --------- ---------
Send 0 0 0 0
Recv 1 0 0 0
Set
Use the set command to dynamically configure specific information for one or all
SDLC link stations without affecting the SRAM configuration. In the SDLC
monitoring environment, the set command can be executed only on disabled links
or stations. All time values are entered in seconds, with a 0.1 second resolution.
Syntax:
Configuring SDLC Interfaces
554
MRS V3.2 Software User’s Guide