Filter
Top Products
LC (Load Configuration Memory)
Loads configuration memory from a host on the network. To use this option, do the
following:
Enter lc at the boot prompt (>). The screen displays information similar to the
following:
Device Types available:
IBD
Token Ring/Ethernet
WAN
Device type [Token Ring]:
v If you enter Token Ring, you will see the following:
Media (UTP/STP) [UTP]:
Speed (4/16)Mb [16Mb]:
Interface IP address: 123.175.56.119
IP Mask (FFFFFF00):
Load Cfg from host: 123.175.68.213
Via gateway: 123.175.56.190
Config File Name: ibmMRNS.cfg
Using Token Ring at (6000000, 0).
Trying host 123.175.68.213 via 123.175.56.190
file ibmMRNS.cfg
.loading
Receiving config memory image
....................................................
Starting at 1040000
Copyright Notices:
Copyright IBM Corp. 1994, 1997
MOS Operator Control
*
v If you enter Ethernet, you see the following:
Connector Type (AUI/RJ45)[AUTO_CONFIG]:
Interface IP address: 123.175.56.119
IP mask (FFFFFF00):
Load Cfg from host: 123.175.68.219
Via gateway: 123.175.56.190
Config file name: ibmMRNS.cfg
Using Ethernet at (6000000, 0).
Trying host 123.175.68.219 via 123.175.56.190
file ibmMRNS.cfg
.loading
Receiving config memory image
..................................
Starting at 1040000
Copyright Notices:
Copyright IBM Corp. 1994, 1997
MOS Operator Control
*
v If you enter WAN, you see the following:
Chapter 9. Boot Options 123