Filter
Top Products
GTE Default
20
packet-size
default
or
maximum
or
window
Specifies the size of the packet.
default
Number of bytes in the data portion of the packet. Possible options
include 128, 256, 512, 1024, 2048, and 4096. This value is used in
the absence of packet size negotiation.
Default
cannot be greater
than
maximum
.
DDN Default
128
GTE Default
128
maximum
Maximum number of bytes in the data portion of the packet.
Possible options include 128, 256, 512, 1024, 2048, and 4096.
DDN Default
256
GTE Default
256
window
Number of outstanding I-frames permitted before acknowledgment
is required. The range is determined by the National Personality
Packet Modulus.
Related configuration parameters are
v Protocol max default window
v Set default window size
reset
retries
or
timer
Specifies the number of reset request retransmissions.
Example: national set reset retries 2
retries
Number of reset request transmissions permitted before the call is
cleared. The range is 0 to 255. In a list command output, this is
displayed as the r22 retry count.
DDN Default
1
GTE Default
1
timer Number of 10-second intervals to wait before retransmitting a reset
request packet. The range is 0 to 255. A zero in the timer value
indicates an indefinite wait. In a list command output, this is
displayed as the t22 timer.
DDN Default
18 decaseconds
GTE Default
18 decaseconds
Configuring the X.25 Network Interface
338
MRS V3.2 Software User’s Guide