Filter
Top Products
ipv6 Lists all information related to IPv6 packets over the point-to-point link.
These fields are the same as those described under the list ip command.
(See “ip” on page 503.)
Example:
list ipv6
IPv6 Statistic In Out
-------------- -- ---
Packets: 0 0
Octets: 0 0
Prot Rejects: 0
ipxcp Lists statistics for the IPX control protocol. These fields are the same as
those described under the list ip command. (See “ip” on page 503.)
Example:
list ipxcp
IPXCP Statistic In Out
-------------- -- ---
Packets: 0 0
Octets: 0 0
Prot Rejects: 0 -
ipx Lists IPX statistics for the point-to-point interface. These fields are the same
as those described under the list ip command. (See “ip” on page 503.)
Example:
list ipx
IPX Statistic In Out
------------ -- ---
Packets: 0 0
Octets: 0 0
Prot Rejects: 0 -
atcp Lists statistics for the AppleTalk control protocol. These fields are the same
as those described under the list ip command. (See “ip” on page 503.)
Example:
list atcp
ATCP Statistic In Out
--------------- -- ---
Packets: 0 0
Octets: 0 0
Prot Rejects: 0 -
ap2 Lists AppleTalk Phase 2 statistics for the point-to-point interface. These
fields are the same as those described under the list ip command. (See
“ip” on page 503.)
Example:
list ap2
AP2 Statistic In Out
------------ -- ---
Packets: 349 351
Octets: 128488 129412
Prot Rejects: 0
dncp Lists statistics on the DECnet control protocol packets. These fields are the
same as those described under the list ip command. (See “ip” on page 503
.)
Example:
list dncp
DNCP Statistic In Out
-------------- -- ---
Packets: 0 0
Octets: 0 0
Prot Rejects: 0 -
dn Lists statistics on the DECnet packets received and transmitted over the
PPP interface. These fields are the same as those described under the list
ip command. (See “ip” on page 503.)
Monitoring PPP Interfaces (Talk 5)
504
MRS V3.2 Software User’s Guide
||
|
|
|
|
|
|
|
|
|