Filter
Top Products
Use the list event and list active commands to verify what you set with the
remote and noremote commands.
Notrace
Use the notrace command to stop display of selected trace events at the
monitoring.
Syntax:
notrace
event...
group...
range...
subsystem...
event
subsystem.event#
Suppresses the display of the specified tracing event.
group
groupname
Suppresses the display of tracing events related to the specified group
(
groupname
).
range
subsystemname first_event_number last_event_number
Where
first_event_number
is the number of the first event in the specified
event range, and
last_event_number
is the number of the last event of the
specified event range.
Disables the sending of packet trace data for a range of messages for the
specified subsystem.
Example:
notrace range gw 19 22
Suppresses the sending of packet trace data for events gw.19, gw.20,
gw.21, and gw.22.
subsystem
subsystemname [logging-level]
Suppresses the display of tracing events that are associated with the
specified subsystem and logging level. If you do not specify a
logging-level
you suppress tracing for all logging levels for the subsystem.
Example:
notrace subsystem frl error
notrace subsystem frl
Notrap
Use the notrap command to select and turn off messages so that they are no
longer sent to a network management workstation in SNMP traps.
Syntax:
notrap
event. . .
group...
range...
subsystem...
ELS Monitoring Commands (Talk 5)
194
MRS V3.2 Software User’s Guide
|
|
|