Filter
Top Products
parameters
V.25bis port Parameters
Local Network Address Name = v402
Local Network Address = 15088982402
Non-Responding addresses:
Retries = 1
Timeout = 0 seconds
Call timeouts:
Command Delay = 0 ms
Connect = 0 seconds
Disconnect = 0 seconds
Local Network Address Name:
Network address name of the local port.
Local Network Address:
Network dial address of the local port.
Non-responding addresses:
Retries
Maximum number of calls the router attempts to make to a
non-responding address during the timeout period.
Timeout
If the router reaches the maximum number of retries to a
non-responding address, it does not attempt to establish the call
until this time has expired. This timeout period begins when the
router attempts the first call to an address.
Call timeouts:
Command Delay
Amount of time, in milliseconds, that the router waits to initiate or
answer a call after it turns on DTR (Data Terminal Ready). If you
set this parameter to 0, the router waits for the modem to respond
to DTR with the CTS (Clear to Send) signal before it issues
commands.
Connect
Number of seconds allowed for a call to be established. If this
parameter is set to 0, the modem controls the connection
establishment timeout.
Disconnect
After the routers drops DTR it waits this amount of time before it
initiates further calls. If you set this parameter to 0, the router waits
for the modem to respond to the DTR drop by dropping CTS and
DSR before it initiates the next call.
Statistics
Use the statistics command to display the current statistics for this V.25bis
interface.
Syntax:
statistics
Example:
V.25bis Operating Commands
590
MRS V3.2 Software User’s Guide