Filter
Top Products
DNA Configuration Saved
Configuring Booting
**********************************************
Boot Configuration
**********************************************
Type 'Yes' to Configure Booting
Type 'No' to skip Booting Configuration
Type 'Quit' to exit Quick Config
Configure Booting? (Yes, No, Quit): [Yes]
1. Enter y to display the boot configuration prompts. Enter n to skip boot
configuration. Enter q to exit quick configuration.
Any previous boot information is displayed, as illustrated in the following
example:
Type 'r' any time at this level to restart Boot configuration
Previous Boot information
Booting Method:TFTP Boot
Interface Number:0
Interface IP Address:128.185.133.18
Address Mask:255.255.255.0
Host IP Address:128.185.120.120
Gateway IP Address:128.185.133.7
Boot file Name:ibm2210.ldc
Create a boot record using this information? (yes, No): [Yes]
2. Enter y to create a boot record with the previous boot information and display
the following prompts:
Boot Configuration saved
Enable Console Modem-Control (Yes, No, Quit): [No]
3. Take one of the following actions:
v Enter y if you are connecting a console to the IBM 2210 through a modem
and if you want autologout on lost phone connections.
v Enter n to connect a console directly to the IBM 2210.
v Enter q to exit quick configuration.
When you enter no, you can then select another boot option from the next
prompt.
Select Booting Method (TFTP Boot, BOOTP Boot, IBD Boot): [ ]
4. Enter the booting method you will use to boot the IBM 2210:
v TFTP
v BOOTP
v IBD
The following sections describe the prompts that appear for each method.
670 MRS V3.2 Software User’s Guide