Filter
Top Products
initiates further calls. If you set this parameter to 0, the router waits
for the modem to respond to the DTR drop by dropping CTS and
DSR before it initiates the next call.
Statistics
Use the statistics command to display the current statistics for this V.34 interface.
Syntax:
statistics
Example:
statistics
V.34 port Statistics
Adapter cable: RS-232 DTE RISC Microcode Revision: 1
V.24 circuit: 105 106 107 108 109 125 141
Nicknames: RTS CTS DSR DTR DCD RI LL
RS-232 CA CB CC CD CF CE
State: OFF OFF OFF OFF OFF OFF OFF
Line speed: 115.200 Kbps
Last port reset: 24 seconds ago
Input frame errors:
CRC error 0 alignment (byte length) 0
missed frame 0 too long (> 2182 bytes) 0
aborted frame 0 DMA/FIFO overrun 0
L & F bits not set 0
Output frame counters:
DMA/FIFO underrun errors 0 Output aborts sent 0
Adapter cable:
Type of adapter cable being used.
V.24 circuit:
Circuit numbers as identified by V.24 specifications.
Nicknames:
Common names for the circuits.
RS-232
EIA 232 (also known as RS-232) names for the circuits.
State: Current state of the circuits: ON, OFF, or ″---,″ which means that the state
is undefined for this type of interface.
Line speed:
The transmit clock speed (approximate).
Last port reset:
Length of time since the port was reset.
Input frame errors:
CRC error
Number of packets received that contained checksum errors and as
a result were discarded.
Alignment (byte length)
Number of packets received that were not an even multiple of 8 bits
in length and as a result were discarded.
Configuring V.34
606
MRS V3.2 Software User’s Guide