Filter
Top Products
Circuit Name
Indicates the ASCII designation of the configured PVC.
Circuit Number
Indicates the DLCI of a currently configured PVC.
Circuit Type
Indicates the type of virtual circuit currently configured. This release
of Frame Relay only supports permanent virtual circuits.
Committed Information Rate
Indicates the information rate at which the network agrees to
transfer data under normal conditions.
Committed Burst Size
The maximum amount of data in bits that the network agrees to
deliver during a measurement interval equal to (Committed Burst
Size/CIR) seconds.
Excess Burst Size
The maximum amount of uncommitted data in bits in excess of
Committed Burst Size that the network attempts to deliver during a
measurement interval equal to (Committed Burst Size/CIR)
seconds.
pvc-groups
Displays all the Required PVC groups on the Frame Relay interface.
Example:
list pvc-groups
Required PVC group = group1
Circuit # 16
protocol-addresses
Displays all the statically configured protocol addresses of circuit mappings
at the Frame Relay interface.
Example:
list protocol-addresses
Frame Relay Protocol Address Translations
Protocol Type Protocol Address Circuit Number or Name
------------- ---------------- ----------------------
IP 125.2.29.4 21
IPX 000000004503 16
Protocol Type
Displays the name of the protocol running over the interface.
Protocol Address
Displays the protocol address of the device at the other end of the
circuit.
Circuit Number or Name
Displays the DLCI of the PVC or the name of the SVC that is
handling the protocol.
switched-virtual-circuits
FR 4 Config>list s
Maximum circuits allowable = 64
Total circuits configured = 9
Total SVCs configured = 2
Circuit Opt- Idle Outgoing Incoming
Name ions Timer Value Value
-------------------------------- ----- ------ ---------- ----------
Configuring Frame Relay Interfaces
424
MRS V3.2 Software User’s Guide
|
|
|
|
|
|
|
|
|
|
|
|