Filter
Top Products
Interface number
The interface number of the router that designates the local port.
Primary or Secondary
Designates the port type, primary (P) or secondary (S).
remote–port
Identifies the IP address of the port directly connected to the serial line on
the remote router.
Example: add remote–port
Group number: [1]? 1
IP address of remote router:[0.0.0.0]? 128.185.121.97
(P)rimary or (S)econdary:[S]? s
Group number
The group number for the port. This number must match one of the
add group parameters configured previously.
IP address of remote router
Identifies the IP address of the interface on the remote router.
Primary or Secondary
Designates the port type, primary (P) or secondary (S).
Delete
Use the delete command to remove group numbers, local ports, and remote ports.
Syntax:
delete
group...
local-port...
remote–port
group
group#
Removes a group (group#) of SDLC Relay configured ports.
Example: delete group 1
local–port
interface#
Removes the local port for the specified interface (interface#).
Example: delete local–port 2
remote–port
Removes the remote port for the specified group.
Example: delete remote–port
Group number: [1]? 1
(P)rimary or (S)econdary:[S]? S
Group number
The group number for the remote port.
Primary or Secondary
Designates the port type, primary (P) or secondary (S).
Disable
Use the disable command to suppress relaying for an entire relay group or a
specific relay port.
Configuring and Monitoring SDLC Relay
Chapter 36. Configuring SDLC Relay 527