Filter
Top Products
Example:
parameters
ISDN Port parameters:
Local Address Name: vl233
Local Network Address: 20
Local Network Subaddress:
Frame Size: 2048
TEI 0: Automatic
TEI 1: Automatic
X.25 TEI: 21
Switch Variant: AT&T 5ESS (United States)
Multipoint Selection: Multipoint
Directory Number 0: 20
Outbound call address Timeout: 180 Retries: 0
Statistics
Use the statistics command to display the current statistics for this ISDN interface.
Syntax:
statistics
Example for BRI:
statistics
Link: Active ISDN Firmware: 1.0 Handler State: Running
D Channel B1 Channel B2 Channel
Total Transmits 32788 230217 164336
Total Receives 32789 164342 208255
Transmit Bytes 196767 22797579 6572177
Receive Bytes 196785 6572411 9517221
Invalid Interrupts 0 0 0
Transmit: D B1 B2 Receive: D B1 B2
Error 0 0 0 Error 0 5 0
Overflow 0 0 0 Overflow000
Underrun 0 0 0 Overrun 0 0 0
Abort 0 0 0 Abort 0 5 0
CRC Error 0 0 0
Example for BRI using I.430:
statistics
Link: Active ISDN Firmware: 0.0 Handler State: Running
Total Transmits 32788
Total Receives 32789
Transmit Bytes 196767
Receive Bytes 196785
Invalid Interrupts 0
Transmit: Receive:
Error 0 Error 0
Overflow 0 Overflow 0
Underrun 0 Overrun 0
Abort 0 Abort 0
CRC Error 0
This display shows the current state of the link, the firmware revision, and
the state of the dial circuit. It also shows statistics on what was transmitted
and received on the interface.
Example for PRI with E1:
statistics
Link: Active ISDN Firmware: 1.0 Handler State: Running
Transmit D Channel Receive D Channel
Packets 68422 Packets 68419
Bytes 411656 Bytes 413592
ISDN Monitoring Commands
Chapter 46. Configuring and Monitoring the ISDN Interface 639