Filter
Top Products
Interface
Displays the ATM Interface+ prompt, described in “ATM Interface Monitoring
Commands (ATM INTERFACE+ Prompt)”.
Syntax:
interface
ATM-LLC
Displays the ATM-LLC+ prompt, described in “ATM-LLC Monitoring Commands” on
page 290.
Syntax:
atm-llc
ATM Interface Monitoring Commands (ATM INTERFACE+ Prompt)
This section summarizes and then explains the commands for monitoring a specific
ATM interface.
Enter the commands at the ATM INTERFACE+ prompt.
Table 39. ATM INTERFACE monitoring command Summary
Command Function
? (Help) Displays all the commands available for this command level or lists the
options for specific commands (if available). See “Getting Help” on
page 10.
List Lists ATM addresses and VCCs.
Trace Starts/Stops packet tracing on a specified VPI/VCI range. Trace can be
viewed by ELS.
Wrap Starts/Stops a loopback test on the VCC.
Exit Returns you to the previous command level. See “Exiting a Lower
Level Environment” on page 11.
List
Use the list command to list various categories of ATM data.
Syntax:
list
addresses
all
circuit
vccs
reserved-bandwidth
addresses
Lists the ATM addresses, along with a descriptive name, in use on the
device.
Example:
ATM Monitoring Commands (Talk 5)
Chapter 22. Configuring and Monitoring ATM 287