Net Number
Indicates the device number of the local port. This number matches
the number displayed using the Config list devices command.
IP Address
Indicates the IP address of the remote port.
group
group#
Displays the configuration of a specified group.
Example: list group 1
SDLC Relay Configuration
Group Number Port Status Net SDLC Station IP Address
Number address (hex)
-------------- ----------------- ------ ------------- ------------
1 (E) Local PRMRY (D) 2
1 (E) Remote SCNDRY (E) 128.185.452.11
Group Number
Indicates the group number and the status of the group, enabled
(E) or disabled (D).
Port Status
Indicates the type of port (local/remote primary/secondary) and its
status, enabled (E) or disabled (D).
Net Number
Indicates the device number of the local port. This number matches
the number displayed using the Config list devices command.
IP Address
Indicates the IP address of the remote port.
Set
Use the set command to configure the SRLY parameters.
Syntax:
set cable
clocking
encoding
frame-size
idle
speed
transmit-delay
cable Sets the cable used on the serial interface. The options are:
v RS-232 DTE
v RS-232 DCE
v V35 DTE
v V35 DCE
v V36 DTE
v X21 DTE
v X21 DCE
Configuring and Monitoring SDLC Relay
530
MRS V3.2 Software User’s Guide
