Filter
Top Products
Buffers Queued 0 0
Invalid Packets Received = 0
Switched Circuits Opened = 0
Frame Layer Counters: Received Transmitted
Information Frames 0 0
X.25 Physical Layer Counters:
Rx Bytes 0 Tx Bytes 0
Adapter cable: Generic DTE RISC Microcode Revision: 2
V.24 circuit: 105 106 107 108 109 125 141
Nicknames: RTS CTS DSR DTR DCD RI LL
PUB 41450: CA CB CC CD CF
State: ON OFF OFF ON OFF OFF OFF
Line speed: unknown
Last port reset: 23 minutes, 48 seconds ago
Input frame errors:
CRC error 0 alignment (byte length) 0
missed frame 0 too long (> 0 bytes) 0
aborted frame 0 DMA/FIFO overrun 0
L & F bits not set 0
Output frame counters: DMA/FIFO underrun errors 0 Output aborts sent 0
Interface buffer pool: Total = 30, Free = 30
The following list describes the interface statistics:
Nt Global interface number
Nt ’ Reserved for future dial circuit use
Interface
Interface name and number (within interfaces of the same type)
CSR COMM and Status Registers address
Vec Interrupt vector
Self-Test Passed
Number of times self-test succeeded
Self-Test Failed
Number of times self-test failed
Maintenance Failed
Number of maintenance failures
Interface state
Display the current state of the input modem control signals, the packet
layer (X.25 layer 3), and the frame layer (X.25 layer 2).
Packet Counters
Provides statistics on packets received and transmitted.
Data Packets
Displays the number of data packets the interface transmits receives on the
network
Data Bytes
Displays the number of data bytes the interface transmits receives on the
network.
Buffers Queued
Displays the number of buffers currently queued for transmission over the
network. These may be frame or packet layer supervisory messages as well
as forwarder packets.
Configuring the X.25 Network Interface
Chapter 27. Configuring and Monitoring the X.25 Network Interface 357