Filter
Top Products
3 : Bridge Application
5 : CHARM ATM Adapter
Network number [0]? 1
LEC+
The LEC monitoring prompt (LEC+), is displayed.
If you know the interface number of the LEC you wish to monitor, enter the
network command followed by the
interface number
of the LEC.
+ network 1
LEC+
LEC Monitoring Commands
This section summarizes and then explains the LEC monitoring commands. You
can access LEC monitoring commands at the LEC+ prompt. Table 45 shows the
commands.
Table 45. LE Config monitoring command Summary
Command Function
? (Help) Displays all the commands available for this command level or lists
the options for specific commands (if available). See “Getting Help”
on page 10.
List Lists:
v LEC Address Resolution Table (ARP)
v LEC configuration
v Data Direct VCC information
v LEC statistics
v VCC table.
MIB Displays LEC MIB objects including:
v LEC MIB Configuration Table
v LEC MAC ARP Table
v LEC Route Descriptor Table
v LEC MIB Server VCC Tables
v LEC MIB Statistics Table
v LEC MIB Status Table
QoS Gets you to the LEC x QoS+ prompt from which you can monitor
Quality of Service as described in Quality of Service Monitoring
Commands in
Using and Configuring Features
.
Trace Sets packet tracing on or off.
Exit Returns you to the previous command level. See “Exiting a Lower
Level Environment” on page 11.
List
Use the list command to list the LEC Address Resolution Table (ART), list the LEC
configuration, list Data Direct VCC information, or list LEC statistics.
Syntax:
list
arp-table
configuration
data-direct-vccs
Configuring Forum LE Clients
Chapter 24. Configuring and Monitoring LAN Emulation Clients 309