Filter
Top Products
configured for this parameter is 4096 bytes. The maximum for X.31
is 256 bytes. This value is utilized in calculating the maximum frame
size for this X.25 interface.
Related configuration parameters are:
v Nat Set Packet Size Default
v Nat Set Packet Size Maximum
Change
Use the change command to change an X.121 address, an DDN X.25 Address, a
protocol configuration, or a PVC definition.
Note: To change an IP address that is associated with an X.121 address, you must
delete the record that contains the address correlation, then redefine the
address mapping.
Syntax:
change
address
htf-address
protocol
pvc
address
Modifies a X.121 address translation. The prompts that appear depend on
the protocol that is changing.
Example: change address
IP example:
Protocol [IP] IP
IP Address [0.0.0.0]?
Enc Priority []?
X.25 Address [00000124040000]?
IPX example:
Protocol [IP] IPX
CUD Field Usage (Standard or Proprietary) [Standard]?
IPX Host number (in hex) []?
Enc Priority []?
X.25 Address [00000124040000]?
htf address
Changes a Defense Data Network (DDN) X.25 address translation.
Example:
change htf-address
Protocol [IP]
Change HTF address [0.0.0.0]?
New HTF address [10.4.0.124]?
protocol
Changes a protocol configuration definition.
Example:
change protocol
Protocol [IP]
Window Size [2]
Configuring the X.25 Network Interface
348
MRS V3.2 Software User’s Guide