Filter
Top Products
Retries
Number of clear request transmissions permitted before action is
taken. In a list command output, this is displayed as the r23 retry
count.
DDN Default
retries=1
GTE Default
retries=1
Timer Number of 10–second intervals to wait before retransmitting a clear
request packet. A zero in the timer value indicates an indefinite
wait. In a list command output, this is displayed as the t23 timer.
DDN Default
18 decaseconds
GTE Default
18 decaseconds
disconnect-procedure
passive
or
active
Specifies the type of connect procedure to use when connecting.
DDN Default
passive
GTE Default
passive
Passive
Specifies that SABM frames are not initiated by the router when
connecting.
Active Specifies that SABM frames are initiated by the router when
connecting.
dp-timer
Specifies the number of milliseconds that the frame level remains in a
disconnected state. Zero indicates immediate transition from disconnected
phase to link setup state.
DDN Default
500 milliseconds
GTE Default
500 milliseconds
frame-window-size
Specifies the number of frames that can be outstanding before
acknowledgment.
DDN Default
7
GTE Default
7
n2-timeouts
Specifies the number of times the retransmit timer (T1) can expire before
the interface is recycled.
DDN Default
20
Configuring the X.25 Network Interface
Chapter 27. Configuring and Monitoring the X.25 Network Interface 337
|
|
|
|
|
|
|
||
||
||