Filter
Top Products
Reference
3-50 GB1400 User Manual
F1:ESC F4:SET
TEST MODE = TIMED
8. As before, to lock in this setup change and return to the TEST Menu, press
the F4 key and see:
F1 F2 F3 F4
MORE LENGTH MODE REPORT
9. The last function we'll perform in this example is to enable End-of-Test and
On-Error reports. To do this select the REPORT function by pressing F4 and
see:
F1:ESC F4:SET
REPORTS ON = NONE
10. Now press the pattern up key three times to select EOT/ERROR which will
enable both End-of-Test and On-Error reports. The REPORT function should
now look like the following:
F1:ESC F4:SET
REPORTS ON = EOT/ERROR
11. To lock in this change and return to the TEST Menu, press F4:
F1 F2 F3 F4
MORE LENGTH MODE REPORT
12. Since all of the setup goals have been accomplished, we now want to exit the
Analyzer Menu system. To do this from the TEST Menu, or from any Menu,
simply keep pressing the F1 key until the normal display appears. In this
example you would see the following:
a. Press F1 and see the second page of the TEST Menu .
b. Press F1 a second time and see the third page of the TEST Menu.
c. Press F1 a third time and see the first page of the main Menu again.
d. Press F1 a fourth time to see the second page of the main Menu.
e. Press F1 a fifth time and see the third page of the main Menu.
f. Press F1 a sixth time to exit the Menu system and see the normal Analyzer
display format.