Tektronix 071-0590-00 Welding System User Manual


 
Specifications
GB1400 User Manual A-9
RS-232 and GPIB Interfaces
Controlled functions Remote control of all front panel functions except POWER and PANEL LOCK.
Read-back functions Read-back of ten data patterns stored in non-volatile memory - unit operating
frequency, bit error rate information, sync and history status, pattern select.
GPIB EOS character LF (line feed) (OA hex)
GPIB Address Front panel select, 0-30, or OFF-BUS
Printer Interface
Format Parallel Centronics-type and re-directable to serial (RS-232C) or GPIB ports.
Hardcopy Front panel key, prints unit setup
Print on event Print if BER threshold is exceeded; programmable rate (1E-02 to 1E-16)
Print on EOW Print on End of Window,
programmable in time (1 sec - 24 hrs), or bits (1E8-1E16)
Print on EOT Print on End of Test, programmable rate 1 sec to 24 hours
AC-Power Requirements
Voltage range 90 VAC to 250 VAC, auto-ranging
Frequency range 47-63 Hz
Power 125 VA Max.
Fuse rating 115 VAC; 4 Amp, 230 VAC 2 Amp
Operating range 0 to +50 degrees C
Mechanical
Weight 10 Kg (22 lbs.)
Size 152 mm H x 366 mm W x 340 mm D (6" x 14.4" x 13.4")
Rack Height 275 mm (7") (4 RMU)