Filter
Top Products
Remote Commands
GB1400 User Manual C-93
byte_block? [a]
Byte Block Query. Returns the hex., octal, or binary representation of the 80 bit section
of the edit pattern beginning with the bit at address a. Note that if there is no editing
session in progress, this command will return the indicated 80 bit section from the current
word pattern.
"a" 0 to 131071 (1M mode)
0 to 65535 (512K mode)
0 to 32767 (256K mode)
0 to 16,383 (128K mode)
0 to 8191 (64K mode)
Min. Abbr. byte_b?
Response [a], [i], [b1], ..., [b2]
in format: <NR1>, <NR1>, <non-dec. numeric(s)>
Example byte_block? 500
BYTE_BLOCK 500, 16, #H12, #HF1
NOTE: If address [a] is within 10 bytes of the end of the pattern, then less than 10 bytes
will be returned. Also, if the last byte of the pattern is included in the requested block, and
this byte contains one or more unused bits, then these bits will be returned with a value of
0.