Filter
Top Products
Functional Overview
GB1400 User Manual 2-11
Generator OUTPUT Section
The controls shown below are used to set up the Generator's clock and data
outputs.
• CLOCK: Use this key to select clock amplitude and offset set up mode.
• DATA: Use this key to select data amplitude and offset set up mode.
• AMPLITUDE (↑↑ , ↓↓ ): Use these up/down keys to adjust clock or data
output amplitude.
• BASELINE OFFSET (↑↑ , ↓↓ ): Use these up/down keys to adjust clock or
data baseline offset.
• INVERT DATA: Use this key to toggle between output data inverted (LED
on) and non-inverted (LED off) mode.
OUTPUT
CLOCK DATA
AMPLITUDE
OFFSET
INVERT
DATA
(D-INV)