Filter
Top Products
Remote Commands
C-24 GB1400 User Manual
word_memory [m], [l], [b1], [b2]
Word Memory. Stores into word memory m the word pattern of length l, with a bit
sequence represented by b1 and b2.
Min. Abbr. word_memo
Arguments m: decimal in range 0 to 9.
l: 8 or 16
b1: #00 to #FF (hexadecimal)
#Q000 to #Q377 (octal)
#B00000000 to #B11111111 (binary)
b2: same as b1. However, b2 is allowed only if l (length)
is set to 16.
Example word_memory 3, 16, #HC4, #HF0
Stores the 16-bit sequence C4F0 (hex) into word memory 3.
word_memory? [m]
Word Memory Query. Returns the 8 or 16-bit pattern saved in word memory m in the
form: [m], [byte 1], [byte 2], where m is either 8 or 16 (word length in bits), and byte 1
and byte 2 are hex representations of the first and second bytes in the pattern. Note that
byte 2 will be included only if pattern length is 16. word_memory? returns the contents
of all programmable WORD memories. The response will units separated by semi-colons
and will contain the memory location, length and data bytes of each memory.
Min. Abbr. word_memo?
Arguments m: 0 to 9
Returns <NR1>, <NR1>, <non-decimal numeric(s)>
Example word_memory? 4 (command)
WORD_MEMORY 4, #H87, #H76 (response)