Filter
Top Products
Remote Commands
C-38 GB1400 User Manual
clock_step [v]
Clock Step. Sets the clock frequency increment/decrement default step size 10 kHz,
100 kHz, 1 MHz, 10 MHz, 100 MHz, or 1000 MHz.
Min. Abbr. clock_ste
Arguments v: <NR3>, in the range: 0.010E+6, 0.100E+6,
1.000E+6, 10.000E+6, 100.000E+6 or 1000.000E+6
Example clock_step 1.000E+6
clock_step?
Clock Step Query. Returns the current clock frequency step size.
Min. Abbr. clock_ste?
Returns <NR3>
Example clock_step? (command)
CLOCK_STEP 1.000E+6 (response)
clock_stp_up and clock_stp_dn
Clock Step Up, Clock Step Down. This command pair is used to increment or
decrement the current Generator frequency using the step size previously defined with the
clock_step command.
Min. Abbr. clock_stp_u
clock_stp_d
Arguments none
Example clock_step_up
clock_step_dn
clock_stp_up [v] and clock_stp_dn [v]
Clock Step Up, Clock Step Down. This command pair is used to increment or
decrement the current clock frequency by v, which can range from: 0.1 MHz to 1405
MHz, in 0.01 MHz steps.
Min. Abbr. clock_stp_u
clock_stp_d
Arguments v: <NR3>, in the range 0.100E+6 to 1405.000E+6.
Example clock_step_up 0.100E+6
clock_step_dn 0.100E+6